Fire Alarm
Quality fire alarms will help protect not only your property from the risk of fire, but more importantly those people inside the building too. Fire alarms are a vital part of all businesses as well as homes and there are even laws stating that every business, small or large, must have a fire alarm system.
A fire alarm gives you that all important extra time to get to safety should the worst happen. You can count on TotalSecure Solutions to provide you with a reliable fire alarm system. Talk to a professional today to discuss your fire safety requirements.
Divides your premises into broad zones so in the event of an alert, the fire alarm panel identifies the zone, but not the precise area. Most suitable for smaller or lower risk environments.
Uses a secure wireless link between the sensors and the fire alarm panel. – typically works like an addressable system, just without the wires. Most suitable for premises which don’t want lots of cable – e.g. churches, historic buildings.
Each individual device has its own unique electronic address if one activates, the fire alarm panel tells you precisely where the problem is. Most suitable for larger or higher risk environments – e.g schools, care homes, hospitals.
The main function of an Emergency Lighting System is to ensure that in the event of a fire or some other event that plunges a building into darkness, the people in the building will be able to clearly and easily be able to find their way out of the building, thus ensuring that the risk of injury or loss of life is greatly reduced.
Our team of Emergency Lighting technicians will ensure that your fire Emergency Lighting system maintained to the highest safety standards – Irish Standard (IS 3217:2013), providing you with the peace of mind that your business or public premises is protected in any event where the normal lighting systems fail.
Remote monitoring is where the fire alarm system is linked to an Alarm Receiving Centre (ARC). This then enables the system to automatically alert the fire service in the event of a fire being detected by the fire alarm.
Just as you would with your car, a regular service for your Fire Alarms simply makes sure that everything is working as it should be, and is ready for the future.
The primary function of the fire detection and alarm system is to provide the occupants of a building the maximum amount of time in order to escape the building during an outbreak of fire. It is essential to have a fully functional fire detection and alarm system which is tested, serviced and maintained on a regular basis.
It is the responsibility of the employer that the fire detection and alarm system is checked in accordance with Health, Safety & Welfare At Work Act 2005. Section 11 of the 2005 Act states that employers are required to prepare and revise adequate emergency plans and procedures and provide the necessary measures for fire fighting and the evacuation of the workplace. With this in mind, it is crucial that the employer, or a designated employee, to check the fire alarm weekly and has a service agreement with a competent person to service the system.
We will carry out four services per annum in accordance with Irish Standards 3218:2013. We will issue a report after each service which states the work carried out and also any recommendations that the engineer has noted. If you don’t have a fire detection and alarm system currently in place, we can provide a free survey of your premises free of charge, with no obligation, and issue you with a quotation to design, install, commission and maintain a fire detection and alarm system in accordance with Irish Standards 3218:2013